Question 1

What types of gates do you supply and install in Parramatta?

Accepted Answer

We supply and install automatic sliding gates, automatic swing gates, manual pedestrian gates, double driveway gates and side access gates in Parramatta. The most common request in Parramatta is for an automatic aluminium sliding gate across a single or double garage driveway, typically 4–6m wide and 1.5–1.8m high, powder-coated in a Colorbond colour to match the fence or house. We fabricate gate panels in-house and can match any standard Colorbond colour.

Question 2

Do you install gates for strata and commercial properties in Parramatta CBD?

Accepted Answer

Yes. Parramatta CBD has a high concentration of strata complexes, mixed-use developments and commercial buildings requiring gate systems ranging from boom gates and rising bollards through to heavy-duty commercial sliding gates with card reader access. We install full commercial gate systems for Parramatta properties including proximity card reader access, vehicle loop detectors for automatic exit, and CCTV-linked video intercoms for reception control.

Question 3

How much do gates cost in Parramatta?

Accepted Answer

Gate costs in Parramatta vary significantly by type. A manual aluminium pedestrian side gate (900mm wide, 1.8m high) costs approximately $600–$1,000 supplied and installed. An automatic sliding driveway gate (4m wide, 1.5m high, including motor, wiring and remotes) costs $3,500–$6,000 installed. A complete commercial gate system with card reader access for a Parramatta strata complex typically starts at $8,000–$15,000 depending on the gate size and access control specification.

Question 4

Can you repair existing gates in Parramatta?

Accepted Answer

Yes. We repair gate motors, hinges, tracks, latches and intercom systems for existing gates throughout Parramatta. For automatic gate motor faults, we carry spare parts for FAAC, BFT and Centurion motors and can typically complete same-day repairs for common faults in Parramatta. For manual gate repairs (sagging gates, broken hinges, worn latches), we can usually schedule within 2–3 business days.

Question 5

Do I need council approval for a new gate in Parramatta?

Accepted Answer

Most residential gate installations in Parramatta do not require council approval under the City of Parramatta DCP if the gate is under 1.8m in height, is not on a heritage-listed property, and is not within a heritage conservation area. Parramatta CBD and surrounding heritage precincts (Harris Park, North Parramatta) may have additional requirements. We can advise on your specific address during the free site visit.

Gates Parramatta

Residential & Strata

In-House Fabrication

Fast Local Service

Parramatta Area Suburbs We Cover

Related Services